MYTOL SOLCUT are used in 5% concentration for metal cutting (both ferrous) and non-ferrous metal) and 1 to 2% concentration for grinding operation.
* Provides excellent cooling and lubrication at the chip/tool interface. * When used for machining protects components from rusting. * Ensures longer tool grinding. * Enables visibility of components, jigs, fixtures and cutting tools, thus offers scope for better control of machine operations. * Contributes towards improved surface finish
MYTOL SOLCUT is a general emulsifiable soluble cutting oil. MYTOL SOLCUT oil can be mixed readily with water in various proportions forming stable emulsions or mixtures with either soft water or of water up to 400 ppm hardness. MYTOL SOLCUT emulsion provides maximum cooling during metal cutting or grinding. Also incorporated with rust inhibitor additive and thus provides good protection against rust to metal components.
Emulsion Stability Test for 24 hrs.10% Emulsion in 500 ppm Hardness Water as CACO3
Flash Point, (COC) oC MIN.
Kinematic Viscosity, cSt. @ 40oC
PH of 3% Emulsion in Distilled Water
8.5 – 9
8.5 – 9
HEALTH & SAFETY
MYTOL SOLCUT oils are unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personalhygiene are maintained.